ROMI-AUDIO Balanced Headphone AMP Less BX-2
真正全平衡全分立件耳機放大器(簡稱:全平衡耳放)
全晶體管分立件全平衡設計
儀器級線性LDO穩壓電源達雙12V供電
全晶體管分立件信號增益級和輸出功放級
強大輸出3000mW at 40 ohm
產品概述:
Less BX-2是真正全平衡分立件耳機放大器設計,信號增益級採用“CAST”(Current Audio Signal Transmission)電流信號傳輸方式,為完全無負回輸的晶體管放大電路,整體頻率響應高速,動態凌厲,聽感上清晰通透,細節細膩豐富。
本機的電流放大皆由配對的雙晶體管組成,全時間A類工作狀態 ,信號增益級及功率放大都工作在全時間電流傳輸模式,可提供極低的失真及極佳的線性放大,信號傳輸與放大方面可以做到更低音染、中性,更好鉅細無遺地反映在音源前端。
本機具XLR平衡輸入,同時亦可以RCA信號源輸入,當RCA 信號源輸入時,電路將自動切換到平衡方式。所有的RCA / XLR輸入信號通過前端V/I轉換FET-BUFF得到恆定輸出阻抗予信號增益級,更好地搭配各種播放器之間的不同輸入阻抗。
輸出級採用4對12.5W的發燒名對管BD139/BD140,在全時間Class-A工作狀態下,得到更大的輸出功率,即使驅動600ohm大耳機也游刃有餘。
使用說明:
1、Less BX-2使用3.7V,容量8000mAh聚合物鋰電池,支援5V 3A-USB(TYPE-C)快速充電,鋰電設有低電及短路保護.
2、充電LED顯示:充電時,四個指示燈相繼閃爍;滿電時,四個指示全亮。
3、工作LED指示:開機時,4顆LED電量狀態指示,2秒後自動熄滅;電量不夠時, 4?LED會顯示當前電池電量 ,約2秒后自動熄滅),約2秒后自動滅燈)
電氣規格:
S/N Ratio >125DB at 1KHz
THD : < 0.002%
Bal-Gain:+8DB(Lo-gain);16DB(Hi-gain)
Bal Output Power: 5000MW / 25 ohm ,3000MW / 40 ohm,1200mw/100 ohm
Output impedance: 1ohm
Input impedance: 49K ohm (3.5mm) ,98K ohm(2.5mm或4.4mm-Bal)
Frequency Breadth (Bal-input): 20Hz - 20KHz ( +/- 0DB )
Power Requirement:DC IN 5V (TYPE-C,3A電流)
BATT:3.7V聚合物鋰電池,容量8000mAh
Size: W93 X L137 X H28 mm
Operating ambient temperature range:-40℃~85℃
ROMI-AUDIO Balanced headphone AMP Less BX-2
.Transistor discrete HDAM full balanced circuit.
.Superlinear LDO dual 12V power supply.
.Transistor discrete HDAM line amp and power amp.
.Powerful output 3000mW at 40 ohms
Product information :
Less BX-2 is full balanced headphone amplifier , line amp is using“CAST”(Current Audio Signal Transmission) current pass through, non-negative feedback transistor circuit, highest frequency response, more details.
Current amplifier is using matched pair transistor , full time class A . Line amp and power amp are working in full time current pass throuht , lower signal distortion and super liner booster, headphone output is more clear , natural and details;
Less BX-2 support full balance and unbalance clossover input, when unbalance input , will auto switch to balanced output. Fet-buff working on balance and unbalance line amp circuit, can match most device input resistance.
Power output using 4 piars 12.5W BD139/140, full time class A ampifity can easy to driver more than 600 ohms headphone .
Less BX-2 using 3.7V 8000mAh Li-ion battery, suppot 5V 3A USB type C fast charging, including low voilage & short circuit protection.
.LED power inductor : when the battery is charging ,4 LEDs is flashing. 4 LED battery full charged , 3 is 75% , 2 is 50% , 1 is less than 25%.
Specification
S/N Ratio >125DB at 1KHz
THD : < 0.002%
Bal-Gain:+8DB(Lo-gain);16DB(Hi-gain)
Bal Output Power: 5000MW / 25 ohm ,3000MW / 40 ohm,1200mw/100 ohm
Output impedance: 1ohm
Input impedance: 49K ohm (3.5mm) ,98K ohm(2.5mm或4.4mm-Bal)
Frequency Breadth (Bal-input): 20Hz - 20KHz ( +/- 0DB )
Power Requirement:DC IN 5V (TYPE-C,3A電流)
BATT:3.7V Li-ion battery 8000mAh
Size: W93 X L137 X H28 mm
Operating ambient temperature range:-40℃~85℃
Pure sliver cable & silver plated copper shielding
Bundle of Balanced Headphone Amplifier and male to male connection cable
*(Purchase together and save up to HKD1000)
*Head of connection cable optional: 2.5mm, 3.5mm, 4.4mm